DOP series (Piston pump)
GLD series (Oil Sealed rotary vacuum pump)
VDN series (Oil Sealed rotary vacuum pump)
PVD –series Oil Sealed rotary vacuum pump
VSN-series Oil Sealed rotary vacuum pump
NB series Booster Pump
NRL series Dry Pump
YM pump Unit
Vacuum gauge
Option parts and vacuum oil
NOC series (Oil cleaner)
NWS series (Oil water separator)
VSN1501 / VSN2401 Oil Sealed rotary vacuum pump
-
Features
Compatible with continuous operation at high pressure (patent pending)
A forced oil circulation system inside the pump enables stable operation even at high inlet pressures.When equipped with the optional oil mist trap and oil return mechanism, these heat-resistant pumps can run continuously at pressure equal to or below atmospheric pressure.
Quiet-running performance
The use of mechanism that reduces operating noise when pumping at ultimate pressure, allows noise levels to be reduced 74dB(characteristic A)for both the VSN1501 and VSN2401 models (Values measured at ultimate pressure while using an oil mist trap at a distance of 1 meter to the side of the pump).
Low vibration
The special single-stage vane design used in this pump permits the use of a high-speed motor (1500 rpm at 50 Hz) that helps to significantly reduce vibration levels in a low frequency range of the spectrum, where the transmission of vibrations through buildings can be a problem. This pump can largely eliminate the need for special foundation work and can be more easily installed on the upper floors of most buildings.
Outstanding ease of maintenance
Checking, adding, and changing oil are done at one side on the pump to facilitate greater ease in performance routine maintenance and inspection. Amount of time between oil additions is extended for oil capacity to be changed over a range of 8 to 1.5 liters.
Applications
• Evaporation, sputtering, and ion plating.
• Gas substitution,back-filling and vacuum heat insulation.
• Vacuum heat treatment furnaces, sintering furnaces,and brazing furnaces.
• Vacuum drying, freeze drying, and vacuum degassing.
• Automated leak testing, vacuum molding and vacuum casting.
• Vacuum packing, vacuum adsorption, vacuum transport and others.
* 1 The value above is measured with Pirani gauge.
* 2 G.V is the abbreviation of gas ballast valve.
VSN6501 / VSN7501 Oil Sealed rotary vacuum pump
-
Features
Low vibration
The special vane structure used in this kind of pump helps to significantly reduce vibration in a low frequency which has high vibration conduction.
Built-in oil mist filter
Compact structure without the need for an external oil mist filter.
Excellent drainage capacity
Can be directly used with Roots pump, easy to connect.
Effective air cooling while water cooling is optional
In a non-open factory environment, water cooling can be used to save energy.
Applications
• Evaporation, sputtering, and ion plating.
• Gas substitution,back-filling and vacuum heat insulation.
• Vacuum heat treatment furnaces, sintering furnaces, and brazing furnaces.
• Vacuum drying, freeze drying, and vacuum degassing.
• Automated leak testing, vacuum molding and vacuum casting.
• Vacuum packing, vacuum adsorption, vacuum transport and others.
* 1 Measured with Pirani vacuum gauge.
* 2 Water vapor tolerance and capacity are measured under following cooling water capacity. Cooling water temperature at inlet port is 26℃.
* 3 Flame-proof motor is available as option. However, multiple voltages cannot be selected.
* 4 Other oil types are available, upon request.
* 5 Size to connect pipe changes when JIS flange is selected for inlet/outlet port.
* 6 At ultimate pressure.